Variation in the vertical zonality of erodibility and critical shear stress of rill erosion in China's Hengduan Mountains     

Zhengan Su  Donghong Xiong  Jianhui Zhang  Tao Zhou  Hongkun Yang  Yifan Dong  Haidong Fang  Liangtao Shi 《地球表面变化过程与地形》2019,44(1):88-97

Soil erodibility is an essential parameter used in soil erosion prediction. This study selected the Liangshan town watershed to quantify variation in the vertical zonality of rill erodibility (k_r) in China's ecologically fragile Hengduan Mountains. Soil types comprised of yellow–brown (soil A), purple (soil B), and dry-red (soil C) in a descending order of occurrence from the summit to the valley, which roughly corresponds to the vertical climate zone (i.e. cool-high mountain, warm-low mountain, and dry-hot valley sections) of the study area. With elevation, vertical soil zonality varied in both soil organic matter (SOM) content and soil particle-size fractions. A series of rill erosion-based scour experiments were conducted, using water discharge rates of 100, 200, 300, 400, 500, and 600 mL min^-1. Additionally, detachment rates (Dr) were measured under three hydrological conditions (the drainage, saturation, and seepage treatments). Results show that both Dr and flow shear stress (Ʈ) values increased as discharge increased. As elevation increased, the k_r values decreased, while the vertical zonality of critical shear stress (Ʈ_c) values showed no obvious variation. The highest k_r values were observed during the seepage treatment, followed by the saturation treatment then drainage treatment, indicating that variation in vertical hydraulic gradients could significantly alter k_r values. This study also found that land-use types could also alter k_r and Ʈ_c values. Further research, however, is necessary to better quantify the effects of subsurface hydrological conditions and land-use types on k_r under different soil zonalities in China's Hengduan Mountains. © 2018 John Wiley & Sons, Ltd.  相似文献   

套管锻铣开窗技术在土耳其贝帕扎里碱矿中的应用          下载免费PDF全文

林修阔  刘汪威  陈晓林  刘志强  隆东 《探矿工程》2020,47(8):50-56

土耳其贝帕扎里碱矿在矿区边缘的碱层出现埋深起伏大、厚度变化大、易尖灭、易涌水等情况，这些特殊的地质情况导致水溶开采钻井过程中同一组井的套管最终下入到了不同的层位，或是原先下入的矿层不稳定，易坍塌。为了解决以上问题而引入了套管锻铣开窗技术。该技术可以将老井眼中已被套管封闭的上部碱层暴露出来形成新的采矿通道，从而提高矿区采收率。先后在14口老井眼中完成了套管锻铣作业，均达到了预期效果。本文介绍了套管锻铣器的工作原理，并以H066井组为例，详细阐述了套管锻铣开窗工艺技术。工程实践表明，套管锻铣开窗技术对于换层开采、钻井处理事故、事故井恢复性生产等方面具有一定的效果，具有减少钻井工期、降低施工成本、延长老井使用寿命、提高矿藏产量等优点，有广阔的应用前景。  相似文献   

Analog simulation of urban construction land supply and demand in Chang-Zhu-Tan Urban Agglomeration based on land intensive use     

Xiong  Ying  Chen  Yun  Peng  Fen  Li  Jingzhi  Yan  Xiaojing 《地理学报(英文版)》2019,29(8):1346-1362

Journal of Geographical Sciences - Urban land intensive use is an important indicator in harmonizing the relationship between land supply and demand. The system dynamics (SD) can be used to...  相似文献   

Dynamic mechanisms controlling the topography of Longmenshan area   总被引：1，自引：0，他引：1  

Xie  Yuan  Li  Yongdong  Xiong  Xiong 《中国科学:地球科学(英文版)》2020,63(1):121-131

The Longmenshan fault, which defines the eastern edge of the Tibetan Plateau, is one of the steepest margins of the plateau with a sharp elevation drop of about 4 km over a distance less than 100 km across the Longmenshan fault. The mechanism which is responsible for controlling and maintaining the elevation difference is highly debated. Using multiple observations including seismic velocity model, Moho depth, effective elastic thickness of the lithosphere, we conducted a quantitative study for elucidating the contributions from crust and lithospheric mantle by an integrated analysis of lithospheric isostasy and flexure. It is shown that the topography of the Longmenshan fault is supported by both lithospheric isostasy and flexure statically, and lower crustal channel flow and mantle convection dynamically. Different mechanisms have different weights for contribution to the topography of the Songpan-Ganzi block and the Sichuan Basin. The static and dynamic support contribute roughly the same to the topographic difference of ~4 km between the two sides of the Longmenshan fault. The static topographic difference of ~2 km is mainly resulted from the lithospheric isostasy, while the dynamic one of ~2 km is contributed by the uprising of the accumulated material in the lower crust beneath the Songpan-Ganzi block and the downward drag force caused by the upper mantle convection under the Sichuan Basin. It is thus suggested that the lower crustal flow and upper mantle convection are dynamic forces which should be taken into account in the studies on the dynamics in the Longmenshan and surrounding regions.  相似文献   

川西甲基卡矿床外围中酸性侵入岩LA-ICP-MS锆石U-Pb年龄及地球化学特征     

李名则  秦宇龙  赵春  詹涵钰  周雄  孙光银 《中国地质调查》2020,7(5):1-9

在川西甲基卡矿床外围新发现了建巴村中酸性侵入岩体,为了探讨其形成时代、成岩构造背景及其成矿条件,开展了LA-ICP-MC锆石U-Pb年代学和地球化学特征研究。结果表明: 该岩体的结晶年龄为(211.8±1.0) Ma; 岩石属于钙碱性-高钾钙碱性准铝质中酸性侵入岩系列,具有I型花岗岩类的特征,其物质来源可能为壳源物质与幔源物质部分熔融。地球化学特征表明其形成于后碰撞环境,与此时期内川西地区的区域性岩浆活动相对应。建巴村岩体的构造位置及岩浆活动特征指示其可能不具备形成伟晶岩矿床的条件。  相似文献   

Retrieval of atmospheric mass densities in lower thermosphere below 200 km from precise orbit of re-entry object CZ-3B R/B by analytical and numerical methods     

Ming-Jiang Zhang  Hong-Bo Wang  Chang-Yin Zhao  Jian-Ning Xiong  Dong Wei  Wei Zhang  Sheng-Xian Yu 《Astrophysics and Space Science》2018,363(8):175

Taking the re-entry object CZ-3B R/B (COSPAR identifier 2012-018D, NORAD catalog number 38253) as an example, retrieval of atmospheric mass densities in lower thermosphere below 200 km from its rebuilt precise orbit is studied in this paper. Two methodologies, i.e. analytical and numerical methods, are adopted in the retrieval. Basic principles of these two methodologies are briefly introduced. Based on the short-arc sparse observational data accumulated in the high accuracy re-entry prediction, orbit determinations of re-entry object CZ-3B R/B are performed sectionally, and then its precise orbit is rebuilt. According to the orbit theory, the variation of orbital semi-major axis of re-entry object CZ-3B R/B induced by atmospheric drag perturbation only is derived from the rebuilt precise orbit. In the derivation of secular change of the orbital semi-major axis of re-entry object CZ-3B R/B induced by atmospheric drag perturbation only, the time-span is set as one minute tentatively. And then retrieval results of atmospheric mass densities in lower thermosphere below 200 km by analytical and numerical methods are presented, as well as their bias deviations from the calculated results of the NRLMSISE-00 empirical model of the atmosphere. Setting bias deviation bands, the corresponding ‘confidence coefficients’ of the retrieved atmospheric mass densities with respect to the model values are given. Average bias deviations of the retrieved atmospheric mass densities by analytical and numerical methods from the model values are also calculated respectively. On the whole, the retrieved atmospheric mass densities by numerical method approach to the model values more closely; the differences between the retrieved results and the model values are relatively smaller at the peaks of atmospheric mass densities than the other places.  相似文献   

Rupture model of the 2013 M_W 6.6 Lushan (China) earthquake constrained by a new GPS data set and its effects on potential seismic hazard          下载免费PDF全文

Rumeng Guo  Yong Zheng  Faqi Diao  Xiong Xiong  Jiao Xu 《地震科学（英文版）》2018,31(3):117-125

Vertical records are critically important when determining the rupture model of an earthquake, especially a thrust earthquake. Due to the relatively low fitness level of near-field vertical displacements, the precision of previous rupture models is relatively low, and the seismic hazard evaluated thereafter should be further updated. In this study, we applied three-component displacement records from GPS stations in and around the source region of the 2013 MW6.6 Lushan earthquake to re-investigate the rupture model.To improve the resolution of the rupture model, records from both continuous and campaign GPS stations were gathered, and secular deformations of the GPS movements were removed from the records of the campaign stations to ensure their reliability. The rupture model was derived by the steepest descent method(SDM), which is based on a layered velocity structure. The peak slip value was about 0.75 m, with a seismic moment release of 9.89 × 10~(18) N·m, which was equivalent to an M_W6.6 event. The inferred fault geometry coincided well with the aftershock distribution of the Lushan earthquake. Unlike previous rupture models, a secondary slip asperity existed at a shallow depth and even touched the ground surface. Based on the distribution of the co-seismic ruptures of the Lushan and Wenchuan earthquakes, post-seismic relaxation of the Wenchuan earthquake, and tectonic loading process, we proposed that the seismic hazard is quite high and still needs special attention in the seismic gap between the two earthquakes.  相似文献   

A multiscale work-analysis approach for geotechnical structures     

Hao Xiong  Zhen-Yu Yin  François Nicot 《国际地质力学数值与分析法杂志》2019,43(6):1230-1250

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.  相似文献   

全干涉成像的微地震定位方法研究   总被引：1，自引：0，他引：1       下载免费PDF全文

田宵  张雄  张华  麻昌英  戴梦雪  储仿东 《地球物理学报》2020,63(8):3105-3115

基于偏移成像的微地震定位方法由于可避免走时拾取误差以及可实现自动化定位等优点被广泛应用.绕射叠加方法将能量沿走时曲线聚焦到空间网格点上,进行成像时需要搜索发震时刻.干涉成像方法利用互相关提取的走时差信息可避免搜索发震时刻,但定位结果受数据信噪比的影响较大.为了进一步提高干涉成像法的定位精度,本文提出一种同时使用互相关和自相关道集的全干涉成像方法,增加的自相关道集提取的S-P走时差可降低震源-检波器方向的定位误差,提高定位精度.单井监测的理论测试和实际数据的研究结果表明,全干涉成像的定位精度高于仅使用互相关道集的干涉成像方法,同时计算效率高于绕射叠加方法.  相似文献   

分布式数据库Greenplum在地震前兆数据存储中的应用     

陈晓琳  李盛乐  刘坚  刘珠妹 《地震研究》2020,(2):412-416,418

随着地震前兆观测台网的加密、采样率的提高,地震前兆观测数据量也在快速增加。在进行地震数据共享服务时,需要快速获得大量数据集,无疑对前兆共享数据库的数据处理能力提出了更高的要求。针对这一问题,提出基于Greenplum数据库的地震前兆数据存储设计方案。通过搭建Greenplum分布式数据库环境,实现了海量前兆数据的快速处理,并与传统Oracle数据库进行对比,结果表明:Greenplum数据库读取前兆数据耗时更低,对于大批量数据的读取操作,Greenplum数据库的优势更加明显;Greenplum数据库良好的可扩展性和对应用编程接口(JDBC、ODBC)的支持,使得其在前兆数据分析处理中的应用前景广阔。  相似文献